/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
* File Name          : readme.txt
* Author             : MCD Application Team
* Version            : V2.2.0
* Date               : 06/13/2008
* Description        : Description of the USB Custom_HID Demo.
********************************************************************************
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*******************************************************************************/

Example description
===================
This Demo provides a description of how to use the USB on the STM32F103RBT6 devices.
The STM32F103RBT6 device is enumerated as HID compliant device, that uses the native
PC Host USB HID driver.

More details about this Demo implementation is given in the User manual 
"UM0424 STM32F10xxx USB development kit", available for download from the ST
microcontrollers website: www.st.com/stm32


Directory contents
==================
 + \include: contains the Demo firmware header files
 + \project: contains pre-configured projects for RVMDK, EWARM5, RIDE toolchains
 + \source: contains the Demo firmware source files


Hardware environment
====================
This example runs on "ET-STM32F103(RBT6)" Board.
    
How to use it
=============
 + RVMDK
    - Open the Custom_HID.Uv2 project
    - In the build toolbar select the project config:
        - ET-STM32F103 : to configure the project 
    - Rebuild all files: Project->Rebuild all target files
    - Load project image: Debug->Start/Stop Debug Session
    - Run program: Debug->Run (F5)    

 + EWARM5
    - Open the Custom_HID.eww workspace.
    - In the workspace toolbar select the project config:
        - ET-STM32F103 : to configure the project 
    - Rebuild all files: Project->Rebuild all
    - Load project image: Project->Debug
    - Run program: Debug->Go(F5)

 + RIDE
    - Open the Custom_HID.rprj project.
    - In the configuration toolbar(Project->properties) select the project config:
       - ET-STM32F103 : to configure the project 
    - Rebuild all files: Project->build project
    - Load project image: Debug->start(ctrl+D)
    - Run program: Debug->Run(ctrl+F9)  

******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE******
